Click for more products.
No produts were found.
Click for more products.
No produts were found.
Welcome
Your shopping cart is empty.
Quick link Stainless steel 7 mm

Square stainless steel 7 mm quick link

Square stainless steel 6 mm quick link
Trapèze 6mm stainless steel quick link

Connect your glider to your harness

This square stainless steel quick link is designed for anchoring your reserve parachute in free flight. It can also be used to attach your paraglider to your harness. Suitable for webbing up to 20mm.

Diameter (mm): 7

Inside height (mm): 52

Inside width (mm ): 34

Weight (g): 66

CU (WLL) : 625 kg

CR Rupture (kg) : 3125

Read moreShow less
CHF14.07 (tax incl.)
In stock, immediate delivery!
Quantity
Close
Reference:
100
Description


A solid square quick link

Use: For free-flight rescue parachute anchoring, or harness attachment (two-seater)

Self-certification with Working Load

  • CU (WLL): 625 kg
  • CR Rupture: 3125 Kg

    CU (WLL) = Working load

    CU (WLL) x 5 = Rupture load

    Material

    - Stainless steel 316 L - Standard X2 Cr Ni - Mo 17-12-2 (1.4404)
    - Type 18/12 molybdenum steel with very low carbon content, protects against the risk of intergranular corrosion.
    - Can be used in environments where type 18.10 steels reside, with the exception of those involving nitric acid.
    - Molybdenum content equal to 2/2.5, enabling it to be used in a wider range of environments than those in which type 18.10 steels are used, notably in the presence of sulfuric acid and chloride in marine environments.

    General aspect to be monitored

    quick link should be carefully checked at least once a year for corrosion, deformation and wear, as well as for operation. Any quick link that has been used to stop a violent fall must be replaced. Proceed in the same way in the event of uncertainty after checking the quick link.
    peguet-carre-image.jpg

    - Close by screwing on the nut to guarantee optimum safety and/or close with a wrench to the recommended tightening torque, the quick link becomes a permanent connector.Caution: no thread should be visible.
    - Payload engraved on each quick link.
    - All quick link must be inspected regularly. In case of doubt, it is the user's responsibility to replace it.
Read moreShow less
Product Details
PEGUET
100

Data sheet

Ø Quick link
7 mm
Form Quick links
Square
Customers who bought this product also bought:

CHF55.28 (tax incl.)
A bag for folding alone Here's the solution for folding alone, in all conditions. Sizes : Two-seater Weight (g) : 267 Length (cm) : 360
Out of stock

CHF32.80 (tax incl.)
Flexible and lightweight thanks to Mesh fabricAllows access to keys without removing radioFits most THK20, V80.... type radiosAttaches directly to harness with VelcroDimensions: 12 x 6 x 3 cmWeight: 45 g
In stock, immediate delivery!

CHF36.54 (tax incl.)
Everything you always wanted to know about thermal flying Here, at last, is the translation of one of paragliding's standard works, written by Burkhard Martens. Thermal flight will give you the knowledge you need to...
In stock, immediate delivery!

CHF25.77 (tax incl.)
Innovative automatic carabiner design Snaplock carabiner for mono or Bi paragliders. Allows for greater effort on the straps. Recommended for harnesses with 20 to 25 mm webbing. Weight (g): 76 Breaking load: 30 kN...
In stock, immediate delivery!

CHF32.80 (tax incl.)
Heavy-duty carabiner Recommended for harnesses with 40 mm webbing. Recommended for tandem, acro and paramotor. Weight (g): 130 Breaking load: 25 kN Strap width (mm) : 40 SOLD INDIVIDUALLY
In stock, immediate delivery!
Limited special offer

CHF83.49 (tax incl.) CHF92.77
A multi-sport helmet The Hexagon paragliding helmet from NEO is a multi-activity helmet , approved for 6 sports: paragliding, speed , skiing, ski-snow, mountaineering, ski touringSizes (cm): S (56) / M (58) / L (60)...
In stock, immediate delivery!

CHF42.17 (tax incl.)
Strong, sturdy Dyneema risers These risers feature a very sturdy, narrow Y-shaped webbing, which is perfectly suited to your tandem rescues. Size (cm) : 215 Weight (g): 100
In stock, immediate delivery!

CHF14.06 (tax incl.)
An antenna for your free-flight radio This antenna is an original model from ICOM and is suitable for all free-flight radios (e.g. Icom V80, ICT3H, Kenwood TH22, Yaesu Alinco, ...). Length: 16 cm Connector : BNC
In stock, immediate delivery!
Related products

CHF70.28 (tax incl.)
Have your parachute packed by professionals Air et Aventure unfolds, aerates and packs your reserve parachute. We can also assemble your harness if required.
In stock, immediate delivery!

CHF70.28 (tax incl.)
Have your parachute packed by professionals Air et Aventure unfolds, aerates and packs your reserve parachute. We can also assemble your harness if required.
In stock

CHF3.28 (tax incl.)
These 10 quick link O-rings are specially designed to hold lines in place on risers quick links. Sold in bags of 10Inside diameter (mm) : 16 Outside diameter (mm) : 20
In stock, immediate delivery!

CHF1.87 (tax incl.)
For locking pods The set of 20 Rescue elastics has several uses: it can be used to lock certain pods, to secure or block lines, and to wrap tandem rescue lines.
In stock, immediate delivery!

CHF8.90 (tax incl.)
Wing repair board The adhesive Ripstop fabric board (A4 format) is specially designed for repairing your paraglider. With its low grammage, it prevents tears from getting bigger without unbalancing the wing....
In stock, immediate delivery!

CHF12.84 (tax incl.)
Repairing your glider The adhesive Ripstop fabric roll can be used to repair tears in your paraglider. Color: 18 colors to choose from Width (cm) : 5 Length (cm ) : 450 Fabric: 70 g/m² with adhesive
In stock, immediate delivery!

Settings

Currency:

Menu

Please sign in first.

Sign in